Below is useful information and general maintenance advice on how to keep your EVERLAST fitness flooring in prime condition:
Initial Cleaning
- Remove all surface soil, debris, sand and grit by sweeping, dust mopping or vacuuming with a high CFM vacuum. For large and high traffic areas, use commercial floor scrubbing equipment to clean floor.
- Scrub floor with a neutral pH (7-9) detergent. We found the TASKI™ profi cleaner (6-8 oz/gal of water) works well using a buffer or auto scrubber with a soft nylon brush or a contact pad.
- Pick up the dirty solution with a wet vacuum.
- Rinse with clean water, picking up the rinse water with a wet vacuum. Repeat as necessary.
- Allow to dry thoroughly, anywhere from 6-8 hours.
Daily Cleaning
- Sweep, dust mop or vacuum floor to remove surface debris.
- Damp mop with a neutral pH cleanser.
Heavy Soil
- Follow initial cleaning directions for hard-to-clean or high traffic areas. These areas may require a greater concentration of neutral cleaner.
For more details on general maintenance, download our installation and maintenance manual. Or, if you have specific questions, please contact our technical services representative at 1-888-383-7655.
Our Products
About Us